spiral mill
英 [ˈspaɪrəl mɪl]
美 [ˈspaɪrəl mɪl]
网络 螺纹轧机
双语例句
- The industrial application has proven that vertical spiral agitating mill is regrinding and fine grinding equipment of excellent performance.
工业生产证明了立式螺旋搅拌磨矿机是一种性能优越的再磨、细磨设备。 - The production and quality of welded pipes would be increased by used tail-swinging spiral welded pipe mill at Taizhong.
太原重工股分有限公司通过采用后摆式螺旋焊管成型机组，使焊管产能及质量得到大幅提高。 - It presents the manufacture instance of grade X80 spiral submerged arc welded pipes longitudinal submerged arc welded pipes and induction heated bending pipes at Huabei Petroleum Steel Pipe Mill.
介绍了直缝埋弧焊钢管生产线预弯工艺的目的，分析了辊式预弯和模压式预弯的特点，指出当前直缝埋弧焊钢管生产线中普遍采用模压式预弯工艺。 - In view of the time varying property of a spiral bevel gear mill cutting system, a piecewise linear and time invariant modelling approach based on time series analysis is proposed in this paper.
为了提高弧齿锥齿轮加工精度和切齿效率，提出弧齿锥齿轮铣齿机切削系统的时序分时建模系统辨识方法。 - The research and manufacture of vertical spiral agitating mill and lts Application in regrinding and scrubbing molybdenum ore
立式螺旋搅拌磨矿机的研制及其在钼矿再磨擦洗作业中的应用 - The Temperature Control System in HF Spiral Pipe Mill
高频螺旋焊管焊缝温度的闭环控制系统 - Application of Edge Planer to Spiral Welded Pipe Mill
刨边机在螺旋焊管机组上的应用 - This article analysis the strip displacement caused by leveling unit in spiral welded pipe mill, and gives out the corresponding improving method to effectively prevent the strip displacement during the leveling.
针对螺旋焊管机组生产中矫平机造成带钢跑偏的原因进行了分析，并提出相应的改进措施，从而有效防止带钢在矫平的过程中跑偏。 - Development and application of high-frequency/ submerged arc dual-function spiral weld-pipe mill line
高频-埋弧双功能螺旋焊管机组的研究与应用 - The setting parameters of the three-roll bending plate internally-sup porting spiral welded pipe mill are critical for ensuring satisfactory and consistent quality of the welded pipe formation.
三辊弯板内承式螺旋焊管机组调型参数是保证焊管成型质量及其稳定性的一个重要因素。 - On the Bite of Spiral Flight Rolling Mill
螺板轧机孔型的研究 - Application of spiral angular wheels to high speed wire-rod mill
螺旋伞齿轮在高速棒材连轧厂的应用 - Controlling the Horizontal Spiral Loop of Φ 219 Welding Pipe Mill With PLC
Φ219焊管机组水平辊螺旋活套的PLC控制 - New driving device for spiral weld pipe mill
螺焊递送机新型传动装置 - The Analysis of Disc Shears Fracture for Spiral SAW Pipe Mill
螺旋焊管机组圆盘剪崩刃现象分析 - Analysis on Steel Strip Displacement Caused by Leveling Unit in Spiral Welded Pipe Mill
螺旋焊管机组中矫平机造成带钢跑偏问题的分析 - Steel barrel was shaped by spiral weld pipe mill.
薄钢筒为螺旋机自动卷焊成型； - This classification principle of spiral grooved liner has been discussed by this article, according to the principle of energy level, it is suggested that new view point, which the spiral direction of spirality grooved liner must be consistent with the rotational direction of ball mill.
根据能量级原理，论述了螺旋沟槽衬板的分级机理，提出了螺旋沟槽衬板的旋向与磨机转向必须相同的观点。 - Modification of spiral feeder on No.1 ball mill
1~球磨机进料螺旋筒的改进 - Discussing the spiral direction of a ball mill's lining plates with spiral grooves
球磨机螺旋沟槽衬板螺旋方向探讨 - The Application of the Vertical Spiral Agitating Mill in Industry
立式螺旋搅拌磨矿机在工业中的应用 - The investigation practice of using hydrocyclone to replace the spiral classifier in the primary grinding operation in two large concentrators shows that the stable operation of hydrocyclones can still be ensured without adding the slag removal system for the ball mill discharged product before feeding to the hydrocyclones.
通过在2座大型选矿厂一段磨矿作业用水力旋流器取代螺旋分级机的研究与实践表明，球磨机排矿在给入水力旋流器之前不增设除渣系统仍可以保证水力旋流器的稳定运转。 - The characteristics of spiral deformation on ASSEL mill and wall thickness accuracy for thick, middle and thin tubes with various D/ S value have been analyzed.
分析了不同D/S值的厚、中、薄壁管在ASSEL轧管机上的螺旋变形特征和壁厚精度。 - The result of simulation analysis demonstrated that the designed spiral cutter could mill and hoist soil well.
数值模拟表明设计的螺旋刀具土壤铣削和升运性能良好。 - The structure of Spiral classifier is compact, it is very convenient for operation, and it also can form close circuit with grinding mills. It is widely used in concentrating mill.
螺旋分级机结构紧凑、使用方便、能与磨矿机组成闭路自流，在选厂中仍被广泛使用。 - According to genetic algorithm, the tool structure and processing technology are optimized based on FEA model in this thesis. Since the spiral groove tools are wildly used in machining industry, ball-end mill and twist-drill are chose as examples to investigate.
基于此，本文针对螺旋槽刀具中应用较多的球头铣刀和麻花钻，结合有限元数值模型和遗传算法，开展了球头铣刀铣削参数优化和麻花钻刀体结构参数优化的研究。 - The modal analysis experiment for spiral slotting end mill has been conducted, and corresponding dynamic characteristics parameter has also been got. 4.
并对螺旋槽立铣刀进行了模态分析试验，获得了相应的动态性能参数。